CODEGRABBER ARGO V4.12 FOR GATE/BARRIERS.

BARRIERS, GARAGE DOORS, AND AUTOMATION SYSTEMS

The code grabber is housed in a compact plastic casing and features a telescopic antenna, a built-in RFID module (for cloning intercom access cards and tags, as well as barrier system tags operating at 125 kHz), an informative LCD display, five control buttons, and a convenient scroll wheel that operates on a joystick principle, allowing easy navigation through the menu. The barrier code grabber, radio frequency scanner for automation systems, and learning remote for 125 kHz RFID cards and tags supports language switching in the settings, offering both Russian and English menu options. If desired, the user can independently set a PIN code to power on the device. In the universal code grabber for barriers and gates, in addition to standard AM modulation frequencies of

• 92 MHz, 434 MHz, 315 MHz, and 868 MHz, it is possible to manually set a custom frequency. Additionally, the

device supports cloning of 125 kHz cards and tags.

• Firmware version: 4.12
• Antenna: telescopic
• Signal reception range: up to 30 m
• Power supply: built-in rechargeable battery
• Code copying function
• Came TOP code search function
• Nice FLO code search function
• Code substitution function
• RF jamming function
• Dynamic code support
• Number of memory slots: 99
• Operating frequencies: 433.92; 433.42; 434.4; 315; 868 MHz
• Manual frequency input: supported (from 300 to 900 MHz)
• User-updatable firmware
• RFID support

SPECIFICATIONS

99 Memory Slots in the Learning Remote Code Grabber. The code grabber has 99 memory slots, allowing you to store up to 99 remotes in a single device! There is no need to carry multiple remotes for gates, barriers, or roller shutters. You can program all your automation into one universal code grabber remote and use it to teach inexpensive remotes, as well as clone 125 kHz RFID cards and tags. LCD Display with 5 Lines. PIN Code. The code grabber features an informative five-line monochrome display where everything is clearly visible. It is easy to navigate the menu, select the required modes, browse already stored memory slots, assign names to entries, and much more. Users can set their own PIN code for device activation. Retractable Telescopic Antenna. The barrier code grabber uses a retractable metal telescopic antenna. When retracted, it is stored inside the device and does not interfere, and when extended up to nearly 20 cm, it significantly increases signal reception and transmission range. Built-in Battery, USB Type-C Charging. No more disposable batteries in the automation code grabber. The built-in battery can be quickly charged via USB Type-C. The RF scanner can operate for a long time and stay in sleep mode for extended periods.

CODEGRABBER “ARGO V4.12”

• Scanning and recording mode, including automatic

scanning.

• Auto code search mode, useful if the original remote

is lost but access is needed.

• Jammer mode, for blocking radio signals.
• Code substitution mode, essential for some types of

automation.

• Code tracking is included. Standard frequencies:
• 92 MHz, 434 MHz, 315 MHz, 868 MHz, with the option to manually set custom frequencies.
• RFID tag and card cloning mode for 125 kHz. Supports

cloning 125 kHz RFID cards and tags.

• Fast mode (standard copying) — may not work in 100% of cases
• Universal mode — with data collection and code calculation on a PC

CAME TAM 432

CAME TOP 432/434

CAME TOP 432/434 EE

CAME ATOMO AT 01/02/04

CAME TOP 862NA (868 MHz)

COMUNELLO KEEP 2/4

COMUNELLO KEEP VICTOR 2/4

Doorhan Transmitter 4/2/D2 Doorhan RCBLACK-4

DTM NEO

DEA Mio TR 2/4 DEA 273 (gray buttons)

DITEC GOL4

DITEC GOL4C (red LED)

DITEC BIXLS2

FAAC XT4 433RC

FAAC TM1/2/3-DS

FAAC 868SLH — works only at 868.35 MHz (via code substitution mode) FAAC XT2 / XT4 868SLH — requires code calculation on a PC Marantec D222 / D224 / D214 (868 MHz) Marantec Digital 302 / 313 / 304 (868 MHz)

NORMSTAHL / CRAWFORD

RCU433-4K, FHS10-01/02, EA433-4KS/2KS,

EA433-2KM, N002800, T40-1/1M, T40-4/4M

MOOVO MT4 / MT4G / MT4V

Nice Flo 4 / 2 / 1 Nice Flor-S (-M) 4 / 2 / 1 Nice Very VE Nice Very VR Nice Smilo 2 / 4 (blue / black buttons) Nice Era Flor Nice Era Inti (INTI1x / INTI2x) Nice Era One (ON1E…ON9E) — issue with opening has been fixed NERO Radio 8101-½ / 4 (434 MHz) NERO Radio 8101-2M (434 MHz) NOVOFERM Novotron 302 / 502

ROGER H80 TX22

ROGER H80 TX12 / TX14

GENIUS BRAVO

GENIUS ECHO TX4

GSN TXRC09

GSN TXRC10

GSN TXRC09TB

GSN TXRC10TB

GSN TR-300S

GSN TR-500F

ELMES UMB

ELMES DWB and other compatible systems

HÖRMANN HSM4, HSE2, HSP4 (868

MHz, blue buttons) Keeloq systems and many others…

CODEGRABBER

“ARGO V4.12” FOR GATE

BFT MITTO 2/4, 2N/4N — TWO OPERATING MODES WITH BFT MITTO REMOTES

6 MAIN OPERATING MODES. MULTI-FREQUENCY SUPPORT

VERSION V4.12 INCLUDES 5 MAIN MODES

5 Buttons + Scroll Joystick, Dimensions. The code grabber has 5 active buttons and 1 scroll joystick. The joystick makes it convenient to navigate menus, switch between modes, select stored memory slots, and configure settings. Device dimensions: 8 × 4 cm; display size: 9 × 21 mm. The screen is compact, low-power, yet informative. The device supports a significantly expanded list of gates and barriers. It can store up to 99 remotes in memory, clone 125 kHz RFID cards and tags, and the RF scanner supports the following automation

systems

• Allmatic B.RO OVER
• Allmatic B.RO STAR
• Allmatic B.RO WN
• Allmatic TECH 3
• AN-MOTORS Black and Silver Buttons
• APRIMATIC TR2/TR4
• BENINCA T4WV
• BENINCA CUPIDO 4
• BENINCA TO GO 2/4WV
• BYTEC/BAISHENG
• Bytec TB-4
• Baisheng RC4-T15

The device provides the option to add new systems upon request. That is, if automatic gates installed in your private home or enterprise are not included in the list, they can be added on an individual basis, allowing even more automation systems to be combined into one universal remote. The difference is that the newer version includes fixes for certain artifacts present in previous versions, adds support for new systems, and features an integrated 125 kHz RFID module. Whenever possible, it is recommended to use the latest firmware version and the new 6-line display.

CODEGRABBER “ARGO V4.12”

CODEGRABBER

“ARGO V4.12” FOR GATE

A very important feature of the device is its ability to teach standard barrier remotes — it functions as a learning remote / master remote. This capability is extremely useful for professionals installing and servicing barriers. Up to 50 codes from different systems can be stored in one learning code grabber, which can then be used to program inexpensive standard remotes for the barriers serviced by your company — convenient for both technicians and clients. Brute-force code search mode is available for CAME TOP and Nice FLO systems. In version 2.5.0 of the universal code grabber remote, transmission has been improved for all systems, code substitution for FAAC systems has been enhanced, code tracking and substitution have been optimized. The device also features a full power-off system for improved energy efficiency and a private activation mode for the universal remote. Many other systems not listed may also operate in code substitution mode, according to specialists. The code grabber supports a “DATA COLLECTION” mode, for example for FAAC 868SLH systems — copying is possible by collecting data and then calculating the code on a PC.

BFT MITTO is supported in two modes

• Fast mode (standard copying) — may not work in 100% of cases
• Universal mode — with data collection and code calculation on a PC (a resource-intensive process that

requires some time even on a fast PC). The result is a fully functional working code. Support for writing EM4305 / T5577 blanks for EM4100 encoding, T5577 for HID PROX II, RFID access cards and tags at 125 kHz in copying and cloning mode. Some other systems can be recorded using a special code substitution mode, for example Keeloq, FAAC 868SLH, and GENIUS Amigo / Amigold dynamic (“rolling”) code systems. Modestly speaking, the new firmware version is a breakthrough; without modesty — a new milestone in technology. Many static-code systems are not listed. Thanks to advanced algorithms, the device supports reception and control of numerous fixed-code systems, such as: PROTECO TX3, PTX433405, WJDZ barrier remote (frequency — 417.9 MHz), and a wide range of remotes, mostly made in China, using Princeton PT22xx encoders. It is not possible to list all supported variants; the list includes only fully tested and most popular systems.